Humanlikemachines

How Waterjets Machine Technology Can You Improve Your Oral Health?

You may refer to it as a waterjets, but others may call it a water pick. However, the word “water flosser” is considered to be more descriptive in the field of dental health. This oral cleansing system is driven by the working technology behind the waterjet machine with its motor and pump. Waterjet oral cleaning creates a stream of pulsating, pressurized water that flows from a pump, and makes it’s way out through a thin mouthpiece.

dentist tool

This highly concentrated stream of water acts as dental floss but in the form of a liquid jet. It helps in the effective removal of bacteria and plaque from the teeth and gums. It will also take away leftover food debris in between teeth and gums that brushing alone leaves behind. 

With respect to reports made by dental organizations from around the globe, they say that water flossing is way more effective than string flossing in terms of removing plaque and managing the outset of gingivitis.

What Makes Waterjet Dental Flossing Good for You?

If you regularly floss your teeth, you’d be most familiar with the struggle and drudgery of wrangling the dental floss string between your molars and back grinders. This is where a  water flosser can come into the picture to bring a much-needed balance. 

But even though water flossers can’t completely take the place of flossing in your daily dental hygiene routine, they can significantly help in completing tasks that string flossing usually fails at.

Waterjet flossing can effectively penetrate the gum line. This is a high-risk region of the mouth where acids and bacteria harbor in. Whilst anyone can benefit from the use of a water flosser, there are certain scenarios under which using it can be extremely advantageous.

For instance, individuals wearing dental braces, difficult dental work, or those suffering from some kind of gum disease, will quickly realize that adding water jet flossing is a helpful addition to their oral care practice. 

But this does not mean to say we are ruling out the role of periodontist or dentist if your teeth or gums require professional treatment.  They remain your best go-to pros for such kinds of concerns. 

Braces

Those who wear dental braces must pay particular attention to their oral hygiene. If they slack off on this, they will run the risk of eventually suffering from bad breath,  swollen gums, cavities, and discolored teeth.

Therefore it is of paramount importance that we remove plaque and all traces of food particles that might have been lodged between teeth and around the braces. We can continue with our standard flossing and brushing practices, but we can choose to couple that with a water jet flossing treatment to elevate our oral care habits. 

Periodontal Disease

It is important for anyone suffering from gum disease to know that their best line of defense against it is a good offense. 

Consider using a waterjet machine-inspired oral flossing system to effectively reach plaque from the farthest regions of your mouth. Standard string flossing and regular brushing may not be able to reach these regions. 

If you happen to have periodontal disease and are receiving treatments for that, the odds are high that you will have periodontal pockets. 

Dental Work

Do you have a dental crown, bridge, or implant? Then you’d agree with us in saying they are a major investment, expensive, and difficult to maintain. You need to clean around crowns, under bridges, and all surfaces above and around your implants. It is the only surefire way to protect your investment and water jet flossing can provide us the much-needed help here. 

Dental Cleansing Routine

Effective dental care always begins with knowing how to properly brush your teeth.  Choosing the right toothbrush is crucial here and knowing how to brush your teeth is important to have a beautiful, radiant smile. 

If you want to take your oral care habits to the next level, we suggest that you consider adding water jet flossing to your dental care routine. This will help ensure that leftover food particles and debris that brushing alone often leaves behind will be cleared off, too. Allowing them to remain lodged somewhere between your teeth and gums brings the possibility of the development of plaque closer.  

What are Some of the Creative Applications of Waterjet Cutting Systems?

Did it ever cross your mind that water, as gentle and delicate that they are, can be made to cut through solid materials like thick slabs of steel? Or how would you digest this one, a bone surgery where the main star is water cutting through the bone itself? 

A strong jet of water, with a minimum pressure of 50,000 PSI, can easily become a powerful slicing and cutting tool that you can use in a sundry of applications. You can also use a waterjet system to have perfectly done perforations on material or for projects that will have you drilling some holes. 

But the most important part about it is that even expert minds from various industries agree with us in saying that the waterjet system is way more efficient when placed alongside other heat-based cutting techniques such as plasma and laser cutters.  

laser technology

This innovative material cutting method makes use of a high-pressure stream of water to cut or slice through a wide spectrum of materials, including solid metals. If you will add abrasive particles to the water, you can further intensify its cutting power and at the same time also reduce cutting process time.  

Origin of Waterjet System

Many of us think that waterjet cutting is a relatively new technology, but the truth is this method has been in use way back since the 1970s. During those days, a waterjet system of cutting is usually applied to cutting wood-fiber tubes. 

Immediately after the waterjet method of cutting was invented and introduced to the public, it soon became the material cutting method of choice of many industries primarily because it employs a cold-cutting process. It did not take a long while before it began to displace other traditional machining and cutting methods.  

Advantages of Waterjet System

There is a good reason why the waterjet method of cutting gained wide acceptance and use in a wide range of industries. Here are some of the highlight advantages that can be enjoyed by employing this method of material cutting. 

  • It does not produce dust. 
  • It does not produce or release noxious gases.
  • You can slow down the cutting process or completely put a stop on it in between process without running the risk of inducing damage to the material. 
  • It is qualified as an isothermal. 
  • You can operate it at any point in the material. 

Applications of Waterjet in Contemporary Industry

Various industries around the globe have integrated into their cutting operations the use of waterjet cutting technology. Like for instance, the aerospace industry which is known for its sophisticated operations utilizes waterjet technology not just for their material cutting concerns but also for shaping and reaming intricate aerospace components. 

The mining industry is also reaping the benefits of this technology. Strong jets of water are being taken advantage of to drill and cut through big boulders of rock in hard-rock mines.

Aside from this, the waterjet technique has also found its way into coal mines. Industry experts vouch that this material cutting technique is not just an effective approach but it is very cost-efficient, too. Hence, the wide-scale use of this revolutionary material cutting method in many different industries comes as no surprise. 

Waterjet cutting technology is also practically used to cut and slice through meats, fruits, vegetables, and other consumable items such as cakes and pieces of bread, in the most hygienic fashion. 

With the mere fact that there is a complete absence of “mechanical” contact, the odds of contamination is mitigated here. (The jet of water used in this system is so fine and thin, yet intensive enough to cut through any material sans the risk of getting the material wet or damp.)

Wrapping Up!

There are a handful of reputable companies all over the country that offer competitive prices in the cutting services they offer. Most of which offer water jets as well. You can partner up with these firms to address your material cutting and slicing concerns that involve brass, aluminum, steel, cork, marble, plastics, granite, titanium, concrete, and many more.  

What is the Advantage of Using Water Jet Cutting Machines for Produce Items?

The prospect of using water jet cutting machines in cutting and slicing through produce could be favorable to the food farming industry because it will spur the coming of a better alternative for processing fresh-cut produce. 

The working technology behind waterjet cutting is not new. It has been around for quite a few decades now. The first application of waterjet technology can be tracked to have happened during the 1970s, however, it only gained good traction in the 1980s and. 

While waterjet technology is gaining acceptance and popularity in many different industries, alongside its growth is the advent of abrasive methods of stone, metals, and glass.  

Where waterjet cutting for produce nowadays is where waterjet cutting for stainless steel used to be some 30 years ago. People then have no idea what it is all about. Available information about it during that time is so limited and scarce. Those who have heard about it don’t have an in-depth idea of how it really worked or what is in it for anyone who will take advantage of it.

Right now, the produce industry is taking its precious time to learn the rudiments of cutting different kinds of perishable goods with water jet systems. And various industry insiders are saying that this groundbreaking technology offers this sector a very good potential in as far as advancing their business interest is concerned. 

Comprehensive research and study will help us increase the current amount of knowledge we have about water jet cutting. The research that was spearheaded by the University of California Davis and presented in Chicago’s United Fresh convention was among those kinds of research we are looking forward to. 

The scope of the study mentioned above would include how waterjet cutting machine systems would fare in terms of their performance when used alongside traditional material cutting methods such as stainless steel knives. The study revealed startling results though. There are a handful of observable cosmetic defects on the surface of the cut romaine leaves. Besides, there is also red discoloration and whitening dehydration on the leaves.  

cutting machines

There are several mechanical factors that will determine the performance of a water jet system and this would include the conveyor speed, type of nozzle, and water pressure. A research team from UC Davis conducted a study on these factors in two independent studies. They compared the use of conventional cutting machines with new, used, and reconditioned blades against a waterjet cutting system.  

No substantial difference was among the cutting treatments, not until the lapsing of the 12-day air storage part. After the passing of 18 days, the sharp nozzle proved itself as the best cutting treatment. The leaves of the romaine displayed less reddish discoloration as opposed to the new blade cuts.  As for the brand new blades, they tend to produce fewer amounts of damage as opposed to the blades that have been used or reconditioned.  

As of this writing, the South and Central Americas are already taking good advantage of water jet cutting machines for tipping green beans. The farming sector is also keen on tapping into this groundbreaking technology in their cutting needs for asparagus, capping strawberries, chunking melons, or trimming green onions. 

Right now we can’t really say that water jet systems are all ready for use in slicing and cutting other types of produce. Like for instance, cut apples since they tend to have brownish discoloration, or citrus fruits because they have pulp.